1·Horizontal continuous casting procedure includes four processes: electrolysis copper plate melting, copper fluid solidification, the drawing and cutting of tube billet.
水平连铸这道工序包括四个过程：电解铜板的熔化，铜液的凝固，管坯的牵引和管坯的切割。
2·Though galvanisation is often done by dipping steel in liquid zinc, it is sometimes done by electrolysis—nickel and copper plating are normally done this way.
尽管一般是通过液态锌蘸洗钢铁来镀锌，有时候也会用电解的方法，在电镀镍和铜时就通常使用电镀。
3·This paper analyses and discusses the problem of high DC power consumption in a copper electrolysis plant during its early stage, and puts forward the method to reduce the DC power consumption.
介绍了某电解铜厂在投产初期，针对直流电耗较高的问题，进行了初步的分析和探讨，并就如何降低电耗所采取措施进行论述。
4·In this paper, the feasibility of combination technique of electrolysis and electrodialysis on copper wastewater was investigated in order to recovery copper as well as water resources.
本文提出并系统研究了电解-电渗析联合工艺处理含铜废水，目的是同时实现铜的回收和水资源的再利用。
5·Activated nickle sulfide is a kind of superfine particle used in the removing copper of nickle electrolysis anode solution.
活性硫化镍是一种用于镍电解阳极液除铜的超细微粒物质。
6·The pretreatment of silver concentrate with high arsenic, antimony and copper is followed by in-pulp electrolysis, the leaching rate of silver is over 95%.
富含砷、锑、铜的银精矿先经过预处理，再进行矿浆电解，银的浸出率达到95%以上。
7·This paper describes the factors affecting the copper electrolysis electric energy consumption and the measures that have reduced the electric energy consumption.
本文介绍了影响铜电解电能消耗的因素以及降低电能消耗的措施。
8·The method adopts hypergravity fields to intensify the electrolysis of the copper powder.
本方法采用超重力场来强化电解铜粉。
9·This paper describes the present situation, causes, countermeasures and results of improvement related to air in electrolyte in the third bank of cells of the copper electrolysis in Daye Smelter.
介绍了大冶铜电解第三系列电解液带气的现关、原因、改进措施及效果。
10·The electrolytic copper with smooth surface and high purity can be achieved through adding a slight amount of addition agent in the copper electrolysis refining process.
在电解精 炼铜过程中添加微量的该添加剂以获得表面平整光滑、纯度高的电解铜。